These Bar-End Plugs are more reliable than those plastic finishing plugs you normally get with bar tape and they make your handlebars look classier! Genius!

WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS SHOULD BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC. NEVER MODIFY YOUR BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE. ALWAYS WEAR A HELMET. 

COMPATIBILITY/INTENDED USE

The Problem Solvers Bar-End Plugs fit handlebars with an inner diameter of 18–20mm.

NOTE: Check with handlebar manufacturer for specific compatibility of Bar-End Plugs.

TOOLS REQUIRED

3mm hex wrench

INSTALLATION

NOTE: For drop bar applications, these plugs work best when about a centimeter of bar tape extends beyond the end of the handlebar drop and can be tucked into the inside of the bar with the plug.

Insert the Bar-End Plug and extra bar tape in to the end of the handlebar and tighten the 3mm bolt until the Bar-End Plug is securely in place.

ONGOING MAINTENANCE

Periodically check to make sure the 3mm hex head bolt is snug so the Bar-End Plug stays put.